The DMX6 Decoder is a six / eight channel DMX512 decoder to 0 to +10 volts. The single board unit provides a simple and low cost solution to DMX interfacing and only requires an external transformer or PSU and XLRs.
Operation
In use the red led will flash to show correct operation and the green data led will light if valid data is being received. If the address switches are set beyond 512 the green data led will flash on and off. If data is lost the green led will turn off after 2 seconds and the analogue output will be maintained, or the output set to zero dependant on the setting of LK1. Both power, data and analogue out are provided by a single 8 pin molex/HE14 connector.
