In use the red led will flash to show correct operation and the green data led will light if valid data is being received. If the address switches are set beyond 512 the green data led will flash. If data is lost the green led will turn off after 2 seconds and the relay output will be maintained, or the relay set to zero dependant on the setting of LK1. Both power, data and analogue out are provided by a single 8 pin molex/HE14 connector.
Technical Specifications:
Maximum Update Rate:
44 updates/s
Maximum number of channels:
512
Relay Output:
Maximum output 24V DC 1A
Hold last frame:
LK1 (A = Yes, B = No)
Low voltage AC:
9/0/9V 3VA or 9/12VDC100 mA
Dimensions:
69mm x 43mm x 18mm
Pinouts
PIN
FUNCTION
1
Data Screen XLR Pin 1
2
DMX -ve XLR Pin 2
3
DMX +ve XLR Pin 3
4
Relay 1
5
Relay 2
6
0V AC
7
9V AC
8
9V AC
For DC Supply Pin 6 = 0V, Pin 7= +V and Pin 8 = not connected.
