XTBA

Cardsets

XTBA’s DMX cards provide a variety of functions to allow the user to build or customise their own projects. All the cards have full 512 address via the PCB mounted BCD switches and on board power supplies so only a transformer and XLR’s are needed. Connections via HE14/Molex connectors except where stated. Cards come with complete instructions but we are always happy to answer any additional questions. In addition we can supply any XTBA product as a card only to fit into your metal work, see price list or POA.

DMX8 AMR PCB

Works with:



Product Number: 
09401

Further information:





AMR = (Analogue , Merge, Replace)

An eight channel analogue input 0-10v +V or 0-5v +V converter to DMX512 PCB.

The eight analogue channels can be set to merge with incoming DMX data (Highest Takes Precedence) or replace channels of DMX. The number of replaced channels can be set from 1 through 8. The card can create its own DMX source if there is no DMX on the input or can be set to transmit only when receiving.

Displays for power / card OK and data in.

Includes BCDs and LEDs.

Specifications:

Dimensions



Supply voltage



Packaging


Colour

DMX8 Relay PCB

Works with:



Product Number: 
09407

Further information:





A eight channel DMX to normally open or closed relays PCB only.

The relay switch level can be user set in 10% steps. The card can be user set for normally open or closed relays. The relays will switch at the set level and switch back at 1% less to allow for noisy desks.

Specifications:

Dimensions



Supply voltage



Packaging


Colour

DMX8 Decoder PCB RDM

Works with:



Product Number: 
09405

Further information:





*Now upgraded to include fully enabled RDM and with added features such as emergency mode and grouping.

A PCB 8 channel 0 to +10V decoder for upgrading existing analogue systems or interfacing to DMX. Channels can be set into two groups of four or individual channels set as non dims. Emergency mode allows all outputs to fade to a predetermined level in the event of DMX loss. Local output test mode from the address switches. RDM enabled.

Eight analogue channels are available via the HE14 / Molex connector.

Specifications:

Dimensions



Supply voltage



Packaging


Colour

DMX1 Relay PCB RDM

Works with:



Product Number: 
09404

Further information:





*Now upgraded specification - Now fully RDM enabled with an emergency mode added...

A one channel DMX to normally open or closed relay PCB.

The relay switch level can be user set in 10% steps. The card can be user set for normally open or closed relays. The relays will switch at the set level and switch back at 1% less to allow for noisy desks.  Displays for power, data and relay active.

Emergency mode allows the relay to close in the event of DMX loss.

Specifications:

Dimensions



Supply voltage



Packaging


Colour

DMX1 Decoder PCB

Works with:



Product Number: 
09403

Further information:





A one channel DMX to analogue 0-10v +V converter on a PCB.

The unit has an additional open collector switch which will be turned on if the selected channel level is above 10%. This feature allows the card to be used with fluorescent ballasts etc.

Includes BCDs and LEDs.

Displays for power / card OK and data. 

Specifications:

Dimensions



Supply voltage



Packaging


Colour

DMX to DALI Converter - PCB

Works with:



Product Number: 
09402

Further information:





The XTBA DMX to DALI card will translate 64 channels of DMX up to 64 channels of the DALI protocol. The unit can be addressed anywhere in the DMX stream via the BCD address switches. The unit will also allow manual control of any and all DALI channels to allow for on site testing without the need for DMX control.

Specifications:

Dimensions



Supply voltage



Packaging


Colour